Step 1
Peel the protective coating off all the panels including the base.
Step 2
Attach the cubes with the screws to the back panel and slot it into the base. For larger cases use a second person to hold the panel in place while the second is prepared.
Step 3
Slot the side panel into the base and screw in place with the back panel. Add the additional cubes to the side panel.
Step 4
Repeat step 3 with the opposite side panel.
Step 5
Slot the front panel in place and attach to the cubes using the screws.
Step 6
Place the top panel in place and screw into the cubes using the remaining screws.
Step 7
Remove case from base and place Lego set in place. Place case back onto base.